|
|
| Line 67: |
Line 67: |
|
| |
|
|
| |
|
| | === Troubleshooting === |
|
| |
|
| | | ==== libMagickCore.so.1: cannot open shared object file ==== |
| | |
| | |
| | |
| Next we need to install the Perl module
| |
| | |
| perl -MCPAN -e 'install Image::Magick'
| |
| | |
| I have ran into it a couple time now where the make test will fail on this, but it will install without an issue with the following:
| |
| cpan
| |
| force install Image::Magick
| |
| | |
| If the above perl command returns an error referring to install seems impossible try the following:
| |
| | |
| cd PerlMagick/
| |
| perl Makefile.PL
| |
| make && make install
| |
| | |
| You can check to see if the module is installed by running:
| |
| | |
| instmodsh
| |
| At the cmd? prompt, press l.
| |
| The module should be listed as Image::Magick
| |
| | |
| ==Install IMagick for PHP 5.4==
| |
| cd /usr/local/src
| |
| wget http://www.imagemagick.org/download/ImageMagick-6.8.2-1.tar.gz
| |
| tar -zxvf ImageMagick-6.8.2-1.tar.gz
| |
| cd ImageMagick-6.8.2-1
| |
| ./configure --without-x --with-perl-options=LIBS='-L../magick/.libs -lMagickCore -L../wand/.libs -lMagickWand -lm'
| |
| make && make install
| |
| | |
| Next Perl Magick
| |
| perl -MCPAN -e 'install Image::Magick'
| |
| | |
| or the following if you have problems:
| |
| cpan
| |
| force install Image::Magick
| |
| | |
| Next install Release candidate for imagick that has bug fix for php 5.4
| |
| | |
| cd /usr/local/src
| |
| wget http://pecl.php.net/get/imagick-3.1.0RC2.tgz
| |
| tar -zxvf imagick-3.1.0RC2.tgz
| |
| cd imagick-3.1.0RC2
| |
| phpize
| |
| ./configure
| |
| make && make install
| |
| echo "extension=imagick.so" >> /usr/local/lib/php.ini
| |
| /etc/init.d/httpd restart
| |
| | |
| Next install updated magickwand
| |
| | |
| cd /usr/local/src
| |
| wget http://www.magickwand.org/download/php/MagickWandForPHP-1.0.9-1.tar.gz
| |
| tar -zxvf MagickWandForPHP-1.0.9-1
| |
| cd MagickWandForPHP-1.0.9
| |
| phpize
| |
| ./configure
| |
| make && make install
| |
| echo "extension=magickwand.so" >> /usr/local/lib/php.ini
| |
| /etc/init.d/httpd restart
| |
| | |
| Should be finished at this point for php 5.4 install of imagick. Be sure to run the tests to make sure that everything is working.
| |
| | |
| php -i | grep MagickWand
| |
| php -i | grep ImageMagick
| |
| php -i | grep imagick
| |
| convert -version
| |
| | |
| ==Install IMagick for PHP==
| |
| | |
| '''Note:''' If ImageMagick updates their code you may need to get the newest version of IMagick from http://pecl.php.net/package/imagick
| |
| | |
| '''Requirements:''' ImageMagick version 6.2.4+ and PHP 5.1.3+.
| |
| | |
| wget http://pecl.php.net/get/imagick-3.0.1.tgz
| |
| tar vxzf imagick-3.0.1.tgz
| |
| cd imagick-3.0.1
| |
| phpize
| |
| ./configure
| |
| make && make install
| |
| echo "extension=imagick.so" >> /usr/local/lib/php.ini
| |
| /etc/init.d/httpd restart
| |
| | |
| Test PHP to make sure that IMagick is installed
| |
| | |
| php -i | grep ImageMagick
| |
| | |
| This should return a line similar to:
| |
| | |
| ImageMagick version => ImageMagick 6.5.0-7 2009-03-25 Q16 http://www.imagemagick.org
| |
| | |
| ==Install MagickWand for PHP==
| |
| | |
| '''Note:''' If the download link is broke. Grab the latest source from http://www.magickwand.org/download/php/
| |
| | |
| wget http://www.magickwand.org/download/php/MagickWandForPHP-1.0.9.tar.gz
| |
| tar vzxf MagickWandForPHP-1.0.9.tar.gz
| |
| cd MagickWandForPHP-1.0.9
| |
| phpize
| |
| ./configure
| |
| make && make install
| |
| echo "extension=magickwand.so" >> /usr/local/lib/php.ini
| |
| /etc/init.d/httpd restart
| |
| | |
| Check that MagickWand installed properly
| |
| | |
| php -i | grep MagickWand
| |
| | |
| You should see a line similar to
| |
| | |
| MagickWand Backend Library => ImageMagick
| |
| MagickWand Extension Version => 1.0.9
| |
| | |
| = 64bit Tested with ImageMagick 6.4.0-2 =
| |
| | |
| deleted old. 32bit instructions should work fine for 64bit as well. Use lwbake unless you know what you're doing.
| |
| ==Install IMagick for PHP==
| |
| | |
| '''Note:''' If ImageMagick updates their code you may need to get the newest version of IMagick from http://pecl.php.net/package/imagick
| |
| | |
| '''Requirements:''' ImageMagick version 6.2.4+ and PHP 5.1.3+.
| |
| | |
| wget http://pecl.php.net/get/imagick-2.3.0.tgz
| |
| tar vxzf imagick-2.3.0.tgz
| |
| cd imagick-2.3.0
| |
| phpize
| |
| ./configure
| |
| make && make install
| |
| echo "extension=imagick.so" >> /usr/local/lib/php.ini
| |
| /etc/init.d/httpd restart
| |
| | |
| Test PHP to make sure that IMagick is installed
| |
| | |
| php -i | grep ImageMagick
| |
| | |
| This should return a line similar to:
| |
| | |
| ImageMagick version => ImageMagick 6.4.0 03/29/08 Q16 http://www.imagemagick.org
| |
| | |
| | |
| ==Install MagickWand for PHP==
| |
| | |
| '''Note:''' If the download link is broke. Grab the latest source from http://www.magickwand.org/download/php/
| |
| | |
| MW="MagickWandForPHP-1.0.9-1"
| |
| wget http://www.magickwand.org/download/php/${MW}.tar.gz
| |
| tar vxzf ${MW}.tar.gz
| |
| cd MagickWandForPHP*
| |
| phpize
| |
| ./configure
| |
| make && make install
| |
| echo "extension=magickwand.so" >> /usr/local/lib/php.ini
| |
| /etc/init.d/httpd restart
| |
| | |
| Check that MagickWand installed properly
| |
| | |
| php -i | grep MagickWand
| |
| | |
| You should see a line similar to
| |
| | |
| MagickWand Backend Library => ImageMagick
| |
| MagickWand Extension Version => 1.0.9
| |
| | |
| | |
| '''--OLD--'''
| |
| | |
| ImageMagick can now be installed by using a cPanel script:
| |
| | |
| /scripts/installimagemagick
| |
| | |
| You may also want to install NetPBM as some scripts use that instead of Imagemagick.
| |
| | |
| yum install netpbm-progs
| |
| | |
| | |
| There is an ImageMagick package in the CentOS yum repository, but installing via this method has shown to be either problematic or disastrous, particularly on servers hosting Movable Type sites. Further, the ImageMagick-perl package in the repo will not work with recent Cpanel servers, as it installs to a particular version of Perl. Please refrain from installing ImageMagick via yum.
| |
| | |
| | |
| Imagick
| |
|
| |
| Imagick is a php extension that adds imagemagick functions to php.
| |
| As of right now, the only version that actually compiles successfully for php5 is 0.9.13
| |
| | |
| You can install it with:
| |
| cd /tmp/pear/cache/
| |
| pecl download imagick-0.9.13
| |
| tar zxvf imagick-0.9.13.tgz
| |
| cd imagick-0.9.13/
| |
| phpize
| |
| ./configure
| |
| make && make install
| |
| | |
| Then add extension=imagick.so to the php.ini
| |
| | |
| | |
| = Troubleshooting =
| |
| | |
| == libMagickCore.so.1: cannot open shared object file == | |
|
| |
|
| If, after installing ImageMagick, you receive the following error" | | If, after installing ImageMagick, you receive the following error" |
| Line 278: |
Line 80: |
| make && make install | | make && make install |
|
| |
|
| == PHP Upgraded? == | | ==== PHP Upgraded? ==== |
|
| |
|
| Most everything will need to be recompiled to work with the new php version. | | Most everything will need to be recompiled to work with the new php version. |
| Line 285: |
Line 87: |
|
| |
|
|
| |
|
| == Cant install the perl module == | | ==== Cant install the perl module ==== |
| It occurs sometimes that you are unable to install the Image::Magick perl module. Determine the version the Image::Magick that the perl installer is trying to add in relation to your '''convert --version''' output. The ImageMagick version must be higher than the perl Image::Magick version. For example, if you have ImageMagick 6.7.0 installed, but you are trying to install Image::Magick 6.77, it will fail. You will need ImageMagick 6.7.7 or higher. | | It occurs sometimes that you are unable to install the Image::Magick perl module. Determine the version the Image::Magick that the perl installer is trying to add in relation to your '''convert --version''' output. The ImageMagick version must be higher than the perl Image::Magick version. For example, if you have ImageMagick 6.7.0 installed, but you are trying to install Image::Magick 6.77, it will fail. You will need ImageMagick 6.7.7 or higher. |
|
| |
|
| In this case, get the source files from imagemagick.org and upgrade manually above the attempted install version. | | In this case, get the source files from imagemagick.org and upgrade manually above the attempted install version. |
ImageMagick
First we need to remove any ImageMagick RPMs
rpm -qa ImageMagick | xargs rpm -e
Customers may want Ghostscript fonts installed, so install those:
yum install ghostscript-fonts
Next we need to get the source and compile it
cd /usr/local/src
wget http://layer3.liquidweb.com/scripts/plBake/packages/ImageMagick-6.8.2-2.tar.gz
tar zxvf ImageMagick-6.8.2-2.tar.gz
cd ImageMagick-6.*
./configure --without-x --with-perl-options=LIBS='-L../magick/.libs -lMagickCore -L../wand/.libs -lMagickWand -lm'
make && make install
/etc/init.d/httpd restart
Now test with the following.
php -i | grep -i imagemagick
IMagick
cd /usr/local/src
wget http://layer3.liquidweb.com/scripts/plBake/packages/imagick-3.1.0RC2.tgz
tar -zxvf imagick-3.1.0RC2.tgz
cd imagick-3.1.0RC2
phpize
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
./configure --without-x --with-perl-options=LIBS='-L../magick/.libs -lMagickCore -L../wand/.libs -lMagickWand -lm'
make && make install
echo "extension=imagick.so" >> /usr/local/lib/php.ini
/etc/init.d/httpd restart
Now test with the following.
php -i | grep -i imagick
Magickwand
cd /usr/local/src
wget http://layer3.liquidweb.com/scripts/plBake/packages/MagickWandForPHP-1.0.9.tar.gz
tar -zxvf MagickWandForPHP-1.0.9.tar.gz
cd MagickWandForPHP-1.0.9
ln -s /usr/local/lib/libMagickWand-Q16.so /usr/local/lib/libMagickWand.so
ln -s /usr/local/lib/libMagickCore-Q16.so /usr/local/lib/libMagickCore.so
phpize
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig && ./configure --without-x --with-perl-options=LIBS='-L../magick/.libs -lMagickCore -L../wand/.libs -lMagickWand -lm'
make && make install
echo "extension=magickwand.so" >> /usr/local/lib/php.ini
/etc/init.d/httpd restart
Now test with the following.
php -i | grep -i magickwand
PerlMagick
cd /usr/local/src/ImageMagick-6.8.2-2/PerlMagick
perl Makefile.PL
make && make install
/etc/init.d/httpd restart
Now test with the following.
perl -MImage::Magick -e "print \"Module installed.\\n\";"
Troubleshooting
libMagickCore.so.1: cannot open shared object file
If, after installing ImageMagick, you receive the following error"
convert: error while loading shared libraries: libMagickCore.so.1: cannot open shared object file: No such file or directory
You need to reinstall with the following method:
./configure LDFLAGS="-L/usr/local/lib -Wl,-rpath,/usr/local/lib"
make && make install
PHP Upgraded?
Most everything will need to be recompiled to work with the new php version.
cd /usr/local/src/lwbake
Go into each folder in turn and run through the phpize and compile scripts. then run a "make clean" and "make && make install" as usual.
Cant install the perl module
It occurs sometimes that you are unable to install the Image::Magick perl module. Determine the version the Image::Magick that the perl installer is trying to add in relation to your convert --version output. The ImageMagick version must be higher than the perl Image::Magick version. For example, if you have ImageMagick 6.7.0 installed, but you are trying to install Image::Magick 6.77, it will fail. You will need ImageMagick 6.7.7 or higher.
In this case, get the source files from imagemagick.org and upgrade manually above the attempted install version.